LARGE FARM MACHINERY AUCTION

MONDAY, DECEMBER 30TH, 2024 @ 8:00 AM (CST)

MFWD TRACTORS: CIH Mgnm 8930, 3 hyds, 540-1000 pto, 9300 hrs, 46” tires & duals, fcty q-hitch; CIH Mgnm 7250, 8000 hrs, 1000 pto, 3 hyds, QH, 18.4-42, frnt wts; CIH 7120, 540-1000 pto, new 18.4-42 duals, 80%, frnt wts, 380-28 frnt tires, 10 bolt hubs, 3 hyds; CIH MX285, 7700 hrs, 4 hyds w/ plntr hook up, lg 1000 pto, frnt susp, 480-50 frnt & rear duals, auto steer ready, Trimble FM Ag GPS; Ford 8630, 4800 hrs, dual pwr, 3 hyds, 18.4-42, frnt wts & fndrs, CAH; JD 2955, dsl, 540-1000 pto, hrs unknown, 13.6-38 frnt & 13.6-46 rear tires, local; ‘87 White 2-155, 4300 hrs, dual hyds, sm 1000 pto, top link, 2 owns, duals, 9 bolt hubs; ’96 Case 7220, 5800 hrs, 18.4-42 tires/duals, 80%, 3 hyds, 540-1000 pto, farm retire, plntr tractor; Oliver 1950, 4300 hrs, dual hyds, frt wts, hydra pwr, 3pt, pto, top link, 13.6-24 frnt & 23.1-34 rear,

 

4X4 TRACTORS: CIH 9150, 4 hyds, 12 sp, pwr shift, 18.4R38 frnt & rear duals, 100 hrs on eng OH, rebuilt radiator, newer center pins; IH 3788, 2+2, 6600 hrs, 18.4-38, 9 bolt hubs, 3 hyd, 540/1000 pto; Case IH 9310, exc tires, 4 hyds, ps, 3pt, pto rebuilt by Stoller IH, 4000 hrs, CAH, clean, works very good; ’19 JD 6145M, 5350 hrs, 145 hp, 24 sp pwr quad trans, 3 hyds, 540 pto, 460/85R38 tires, very good cond; ’18 JD 5100E, 6520 hrs, 100 hp, LH rvrsr, cab, a/c, 540 pto, 3 hyds, 3pt, runs & drives well; ’18 CIH Maxxum 145, 6555 hrs, 145 hp; part pwrshift trans, 3 hyds, 3pt, 460/85R38, runs & drives well; ’76 IH 4568, 6300 hrs, 3 hyds, 300hp, 20.8-38 duals, 1 of 858 built, runs & drives well;

TRACTORS: JD 4640, 9200 hrs, 3 hyd, quad range, lg 1000 pto, 20.8-38, CAH; JD 4630, CAH, 6900 hrs, sm 1000 pto, 2 hyds, 18.4-38, 80%, synchro; ‘75 JD 4230, dsl, orig, fndrs, no cab; JD 4040, 5400 hrs, 540-1000 pto, 2 hyds, quad range, cold a/c, JD 158 ldr, orig; ‘61 JD 4010, 5350 hrs, 4 sets rear wts, FS 18.4-34, 7.50-18; JD 4000, 1 hyds, 540 pto, JD 148 ldr; JD 2940, w/ JD 148 ldr, 1 own; ‘76 JD 2040, dsl, all new FS tires, 3pt, top link, pto, hyds, 3200 hrs; JD 900 HC, 2WD, 2276 hrs, cult & fert unit, one own; IH 1086, 2 hyds, 540-1000 pto, 18.4-38, 80%, eng OH 2 yrs ago; IH 1066, 9600 hrs, 2 hyds, 540/1000 pto, top link18.4-38, 90%; IH 786, dsl, 8300 hrs, no cab, never had one; IH 706, 3500 hrs, NFE, 540/1000 pto, 1 hyds, 3pt, top link, gas, FS 16.9-34 tires, straight & org, runs good; IH 86, hydro, WFE, dsl, 3pt, 540 pto; Case 2090, CAH, 3pt, 11.00-16 frnt & 18.4-38 rear tires, dual hyds, 540 pto; Case 380 L/L, w/ ldr, 3pt, dsl, 540 pto; Ford 8000, dsl, 7300 hrs, dual pwr, 18.4-38, 3pt, pto, eng OH; Ford 4610, Wstndrf ldr & hay spr, 1 hyds, 1300 hrs, 540 pto, off 80 acre farm, 16.9-28, like new, 4 sp, hi-lo; AC 7030, CAH, 20.8-38, frnt wts, eng OH; White 2-155, 2 hyds, 18.4-38, sm 1000 pto, 3pt, runs/drives good; White 2-135, CAH, new inj pump, 4/5 yrs ago; JD 730, dsl, elec start, ps, roll-a-matic frnt end, 3pt, pto; Ford 8730, 4400 hrs, CAH, dsl, pwr steer, 140 hp, rvrsbl 540-1000 pto, 3 hyds, cat III 3pt, frnt wts, 20.8R-38, farm retire; ’89 CIH 7120, 2WD, 18.4-42 tires/duals, 6200 hrs, CAH, farm retire; AC 7050, CAH, 6700 hrs, 18.4-38, 80%; AC 6080, 5800 hrs, new R12 a/c, CAH;

COMPACT TRACTORS: ‘21 Kubota L2501D, 540 pto, top link, 76 hrs, 24 hp, GY 27×8.50-15NHS frnt & 15-19.5NHS rear, Kubota 4525 ldr; Kubota 2680, 134 hrs, 540 pto, top link, ldr; ‘17 JD 1023E, 60” auto connect deck, 277 hrs, 540 pto, top link, 2 hyds, 18×8.50-10 NHS frnt & 26×12.00-12 NHS rear; JD 1023E, MFWD, 540 pto, 42 hrs, hydro, rops, JD 120R ldr w/ q-tach; NH Boomer 35, 357 hrs, Titan 25×8.50-14 frnt & 43×16.00-20 NHS, 540 pto, top link; McCormick X1.25H, 31 hrs, ldr; Mahindra 2415, w/ ldr; Mahindra 1526, w/ ldr, MFWD, dsl, 419 hrs, 3pt, 540 pto, 4sp, hi-lo;

 

FRONT LDRS/BUCKETS/BLADES/FORKS: Wstndrf 42, off IH 66, QT bkt; Great Bend 760 Frnt Ldr, QT bkt, forks; Land Pride 72” Blade, 3pt, cut edge, man adj angle; Frnt Mount V-Plow, good cond; JD 300 Series Bkt, 90”, unused; Wstndrf Pallet F, q-tach; Several Pallet Forks, skid ldr mount; CIH 890 Frnt Ldr, off Mgnm 7130, q-tach bkt & ldr; New Land Pride RB1572 Rear Blade, 6’, 3pt; New Kubota 66” Ldr Bkt, QH; Wstndrf WF42 Frnt Ldr, 7’ bkt, brkts; 3pt Yellow Blade, 7’; Great Bend 860 Frnt Ldr; NH 270TL Frnt Ldr, 6’ bucket; JD Frnt Ldr, q-tach, hardly used, cmplt; JD 115 Hyd Blade, 3pt; IH 2000 Frnt Ldr, fits 66 or 06, cmplt; JD 148 Frnt Ldr, w/ brkts; Westendorf 12’ Box Scraper, red; 11’ Snow Blade, 2 way; 7.5’ Rear Tractor Blade, mounts on Reese Hitch; NH 611TL QT Ldr, w/ bkt, mounts for NH Workmaster 50, unused; JD 3pt Grdr Bld; 6’ 3pt Angle Blade;

COLLECTORS: ‘70 JD 4020, 7400 hrs, dsl, WFE, side console; MM Combine, Kohler eng; JD 830, dsl, pony motor, runs good;  IH Farmall M, fndrs, factory power steer, live hyds, converted to 12v w/ alt, runs good; JD GM, NFE, 540 pto, 6.00-16 frnt & 12.4-38 rear tires, 90%, straight metal, runs good; ‘67 IH Farmall 1206, row crop, dsl, open station, fndrs, 4500 hrs, dual pto, 3pt; ‘71 IH 856, dsl, 4700 hrs, 18.4-38, 90%, dual hyds, 540-1000 pto, orig paint, sharp; AC D21; Ford 9600, open station, roll guard, cnpy; JD R; IH 1206; Farmall Super H; AC CA;

 

INDUSTRIAL: ‘19 Yanmar V10 80 Mini Exc, back fill bld, rubber pads, 793 hrs, CAH: JD 650LT Dozer, good pins & rolls, 6000 hrs, 18” trks, orops, brsh bars, 6 way bld; ‘20 Cat 289D3 Skid Steer Ldr, CAH, 2 sp, 2500 hrs, rbr tracks, hyd q-tach bkt; JD 401D Ldr Tractor, 5400 hrs, 540 pto, cab, 16.9-24, 80%, diff lock, LH reverse; Gehl 4500 Skid Ldr, gas; Hyster Challenger 80 Frklft, runs good; JD TR48E Worksite Pro Trencher, ss mnt, like new; Pro Chopper King Machine Straw Blwr & Seeder; JD 1812C Front Dirt Pan, equalizer hitch, 4 whl, rear hitch & hyds; Tractor Hitch for Dirt Pan; JD 772A Road Grader, hyd frnt lift & drive, rear bumper & hitch, ready to use; NH 575E TLB, 4WD, 7200 hrs, 16.9-28, cab, a/c; Sany 18” Digging Bucket; USA Attachments 17” Digging Bucket; Esco 26” Digging Bucket; CP 12” Digging Bucket; (2) JD 24” Digging Bucket; JD 710B TLB, 3344 hrs, 2WD, heat, cab, 14.5-75-16 frnt, 20.5-25 rear, runs good; ‘16 Takeuchi TV240 Mini Excavator, 2900 hrs, hyd wrist to twist, 3’ grading bkt; 18” Grading Bkt; 5’ Skid Ldr Grapple Bkt; Bobcat T116 Trencher; IH 2500 Bhoe; Grapple for CAT 305; Stout 54-8 Grapple, ss q-tach; Sout 66-9 Brush Grapple, ss q-tach; Stout HD72-8 Brush Grapple, ss q-tach; Stout 72-3B Rock Grapple, ss q-tach; ’15 Case 850M Crawler Dozer, dsl, hydro, CAH, 6 way bld, 28” tracks, 5300 hrs, ’16 Hyundai HL940 Whl Ldr, 4-1 bkt, 4100 hrs, a/c, org paint, sharp;

 

MECHANIC SPECIALS: Steiger Cougar ST270, 3pt, no trans, hasn’t run for 3 yrs; JD 60, 13.6-38 tires, new clutch, carb needs rebuild; Ford 9600, dsl, factory no cab, 18.4-38, motor stuck; IH 966, dsl, cab, needs shift cover rebuild, runs good; IH 666, gas, WFE, 3pt, 540 pto, hasn’t run for 7 yrs; Ford 4000, w/ Ford 735 ldr, runs rough; Case 930, for parts; Steiger Panther Tractor, doesn’t run;

 

COMBINES: ‘08 CIH 7010, 2WD, 20.8-42 duals, 35%, 540/65R30, wide feed house, shaft drive revers, 2800/1700 hrs, chaff spread, 21’ unld agr, repairs: $27K in 2023, $13K in ‘22, $9K in ‘20, $6K in 2019, always shedded; ‘98 CIH 2366, 2WD, 3500/2500 hrs, rock trap, chopper, 30.5-32, Maurer bin ext, well maint; ‘92 CIH 1680, Cmns eng, 2WD, 5665 hrs; ‘12 JD S680, 3200/2200 hrs, pro-drive, no def, 5 spd feeder house, 28L-26 tires, chpr, 24’ long unload auger, auto steer & draper ready, 650/65R-42 duals, Maurer 2 stage bin ext; ‘04 JD 9660, 4300/2800 hrs, 28L-26 rear & 12.50-32 frnt tires, chpr, Maurer bin ext; ‘96 JD 9600, aprx 3800 hrs, 24.5-32, 12 ply, 80%, Greenstar/Auto Trac; JD 9600, 4×4, 30.5-32, chpr, Greenstar, farm retire; JD 9600, 4×4, 30.5-32 tires, chpr, farm retire; Gleaner R40; ’05 JD 9760, 2WD, 4542/3078 hrs, chpr, duals, bin ext;

CORN HEADS: ‘11 JD 608C, hyd deck plates, height sensors; ‘96 JD 893, 8R-30”, single pt hook up, pto drive, hyd deck plates, good rolls; JD 893, 8R-30”, hyd deck plates, single pt, pto, wedge kit, SS plates on hoods, good rolls & chains; ‘97 JD 693, 6R-30”, pto hook up, new deck plts; JD 693, 6R-30”, local farm retire; JD 643, 6R-30”, good rolls & metal, ear svrs; JD 643, 6R-30”, oil bath, good rolls; (2) JD 443, 4R-30” high tin; JD 494, 4R-36”; CIH 3412, 12R-30”; ‘10 CIH 3408, 8R-30”, hyd deck, knife roll, header height control, single pt, ear svrs; CIH 2412, 12R-30”, hyd deck plates; ‘01 CIH 2208, 8R-30”, flagship hookup, hyd deck plts; (2) CIH 2208, 8R-30”, hyd deck plts; (2) CIH 1083, 8R-30”; CIH 1063, 6R-30”, poly dvdrs, high shields, good knives & chains; IH 1063, 6R-30”, hi tin, good knives; IH 963, 6R-30”, good knives & chains; IH 843, 4R-30”, hi-corn svrs, good knives; IH 843, 4R-30”, nice; Gleaner A330, shedded; ’17 CIH 4408, 8R-30”, sngl pt hook up, stalk stmprs, stalk gather cones, nice!; ’14 CIH 4408, 8R-30”, sngl pt hook up, stalk gather cones, nice; ’06 JD 893, 8R-30”, pto drive, fluted rolls, row sense head height, hyd deck plts;

 

GRAIN HEADS: ‘09 JD 635F, 3” cut, ss floor, good poly, full fngr; JD 630F, 30’; ‘15 JD 625F, poly, full finger, low acres; ‘14 JD 625F, 25’, good poly, fore & aft, sharp; ‘01 JD 930, 30’, good poly, poly dividers, fore & aft, good reel, full finger; JD 925F, 25’, ss floor, poly; JD 925, 25’, poly floor, fore & aft, w/ 2 whl cart; JD 920, 20’, 3” cut, good poly; JD 918F, 18’, flex head, fore & aft, good poly; JD 915, 15’, 3” cut, sharp; JD 913, 13’, flex hd, poly skid plates; JD 220, 20’, w/ 20’ cart; JD 218, 18’, 3” cut, black reel, always shedded; (2) JD 216, 16’, 3” cut, very nice; JD 213, 13’, 3” cut, ss, sprkt drive; CIH 1020, 25’; MF 9316, 16’;Gleaner 20’, off Gleaner R-40; CIH 1020, fore & aft, 1 drive shaft, 3” sickle;

 

HEAD CARTS: IA 2042, 42’; ‘24 EZ Trail HH31, 31’; ‘23 EZ Trail 680, 26’, JD brkts, dbl tie downs, 20.5 tires; ‘23 EZ Trail 680, 21’; ‘23 EZ Trail 680, 20’; EZ Trail 680, 20’, ext tongue, same as new; ‘09 UM HT36, 36’, red, lghts; ‘11 UM HT30, 30’, green, lights, ext hitch; UM HT30, 30’; UM 30’, ext tongue; UM HD25, 25’, lghts; UM HT25, 25’; ‘23 EZ 880, 31’, JD & CIH brkts, dbl tie downs; EZ Trail 672, 20’;  ‘03 Horst 425, 25’, 20.5×8-10, black; J&M 30’, black; ’22 J&M HT974, 36’, 225/75R15, like new; J&M HT-94, 36’, car tires, led lights;

 

AUGER CARTS: J&M 750, red, lg 1000 pto, 30.5-32, weld on auger hinge (done right); J&M 620, 1000 pto, 14” auger, 30.5-32, lghts, sharp; Kinze 850, 18” augers, roll tarp, lghts, 1000 pto, 30.5L-32, good augers, just out of the field; KB 1200, sm 1000 pto, 24.5-32, 12 ply, no welds; Parker 500, 500 bu, crnr auger, 23.1-26, 10 ply, sm 1000 pto, good augers; EZ Trail 500 bu, 1000 pto, 18.4-26, good augers; EZ Trail 475, good augers, 18.4-26, fndrs, sm 1000 pto, no welds; A&L 500, 18.4-26, good auger, tarp; ‘96 Brent GC774, J-Star EZ150 scale; Bradford 528, tarp, side auger, lights, sm 1000 pto, rear hitch; UM 470, rebuilt drive line, good auger; Brent GC472, 1000 pto, crnr auger, camer, diamond tread tires;

 

WAGONS: (2) KB 1065, 4 brks, ext hitch, light kit, 425/65R-22.5, like new, always shedded; KB 350, on JD 1065 gear, hyd auger, split box; EZ Trail 3400, 12.5L-15, EZ Trail 1074 gear; J&M 540, roll tarp, rear htch, lghts, brakes, 4.25×22.5, sharp; M&W 300 bu; UM 530, green, tarp, ext hitch, brakes, sharp; UM 530, green, lights, brakes, good flotation tires; UM 530, red, lights, brakes, good flotation tires; UM 530, green, tarp, fndrs, brakes, lights; Brent 657, 4 brakes, 3 yrs old; Kory 340, on Kory 8278 gear, 8 ton, ext tongue, 16.5-16.1; Parker 350 bu; Orange 200 Bu, on 10 ton gear, 6 lug; Orange 200 Bu, on IH 335 gear, 10 ton, 8 lug; Brent 250 Seed Wgn, auger, new tarp, 12.5L-16 (new frnt tires), runs & operates good; Heider 6’x12’ Barge Wgn, on JD 953 gear, hyd lift, good tires;

 

GRAIN AUGERS: Hutchinson 13”x72’, 540 pto, new gear bxs & bearings, sharp; Kewanee 8”x70’, swing away; 6”x25’;

 

GRAIN CLEANERS: Low Profile, good auger, no motor; Hi-Cap 548, elec; Fetrel 100, 3hp, elec, 230 volt; Neco 26 model, 3 phase 5 hp motor, 125’ cord;

 

PLANTERS: ‘16 Kinze 4900, 12R-30”, vac, 1000 pto pump, trsh whls, mrkrs, bulk fill, elec drive, dbl closing whls, t-hndls, low acres, sharp!; Kinze 3600, 16/32R, NT, mrkrs, bean mtrs, sharp; Kinze 3600, 16R-30”, prec mtrs, Yetter row clnrs, c/b plates; Kinze 3600, 12/24R, liq fert, NT, 150 gal fert tanks; ‘13 Kinze 3500, 8/16R, piston pump, 2×2 fert, 3700 ac, Keeton firms, KPM3; Kinze 3500, 8/16R, liq fert, c/b meters, Kinze monitor, sharp!; ‘12 Kinze 3500, 8/15R, NT, farm retire, Kinze KPM3; ‘98 Kinze 2600, 16/31R, prcsn corn units, insect, Martin clsg whls, depth whls, Gen I Prcsn 20/20 Seed Sense; Kinze 2600, 16R-30”, corn meters, shut offs, liq fert, prcsn air bags, hyd drives; Kinze 2000, 6R, NT, new seed blds; Kinze PT6, 6R-30”, liq fert, row clnrs; JD 1790, 12/23R, NT, bulk fill, farm retire; JD 1780, 16R-30”, vac, 1.5 bu poly bxs w/ exts, GS mon; JD 1780, 12/23R, flex fold, CT 250; ‘09 JD 1770NT, 24R-30”, Max Em Plus, 1 own, liq fert, smart bxs, mrkrs, dble spike close whls, t-handle, Keeton seed frmrs, 1 own; ‘02 JD 1770, 24R-30”, cons frame, 3 bu poly bxs, NT, vac, HD DP, weld on 7×7 tube on both wings, done right; JD 1770, 16R-30”, NT/trash whl combos, Max Em Plus, c/b plates, Green Star; JD 1770, 10R-30”, NT, vac, liq fert, SD fert opnrs; ‘10 JD 1750, 8R-30”, Max Em XP, finger pu, dry fert, mrkrs, vac, poly bxs, CT 350; JD 1750, 8R-30”, cons frame, liq fert, 2 sp HD DP, NT, vac, DD fert opnrs, insect, John Blue pump; JD 1750, 6R-30”, dry fert, DD fert opens, corn meters, bean cups, good tines & blds, CT 150; JD 7200, 16R-30”, mrkrs, insect, dbl close whls, t-hndls, CT 250; ‘95 JD 7200, 12R-30”, cons frame, NT, Keeton frmrs, CT 250; ‘95 JD 7200, 12R-30”, Max Em II, vac, cons frame, liq fert, mrkrs, NT, Keeton seed frmrs, CT 250; ‘90 JD 7200, 12R-30”, NT, wing fold; JD 7200, 12R-30”, liq fert, vac, precision meters, 4 sp DP, insect bxs; JD 7200, 12R-30”, NT/trsh whl combos, vac, DP springs, flex frame, farm retire; JD 7200, 8RW, Yetter trash whls, Keeton frmrs, folding; JD 7200, 6R-30”, finger pu, cons frame, dry fert, UM cross auger, JD seed opnrs, NT, CT 150; JD 7200, 6R-30”, vac, cons frame, NT combos, liq fert, JD SD fert opnrs; JD 7000, 12R, liq fert, trash whls, Prcsn 20/20; JD 7000, 12R-30”, wing fold, mrkrs, trash whls; JD 7000, 6R-30”, mrkrs, dry fert, dbl close whls, t-handle, CT 100; JD 7000, 4RW, liq fert, 2 spring DP, qck fill, sharp; JD 7000, 4R-36”, dry fert; 2010 CIH 1250, 24R, 2500 ac on rebuild, always shedded, farm retire; IH 56, 4R; White 6346, 12R-30” or 13R-15”, sm 1000 pto, Yetter trash whls, new seed blds, corn/bean plts; White 6100, 12R-30”, vert fold, 1000 pto pump, closing whls, S/M/L corn plts; White 6900 Split Row Planter Unit, 6R; Landoll 4400, 4R corn, 7R bean, quadra disks, clean plntr; NI 9R-20”, 2 spring DP, Kinze row units; White 6900 Splitter Bar, 7R, lift asst; 7R Splitter, w/ AC units & lift asst; 2 Row Trnsplntr; CIH 955, 8R-30”, wing fold, mrkrs; IH 800, 4R-36”, 540 pto pump, late model cast row units, corn drum; CIH 900, 8R-30”, folding, 1000 pto pump, bean drum; JD 7000, 12R-30”, wing fold, prec corn mtrs, Yet mrkrs, row clnrs, spike clsg whls, t-hndls, insec bxs, 7/8 drive shft, Jamison whl dr, rebuild sprg ’24; ’23 Kinze 3505, 8/16R, c/b meters, NT, bulk fill, spike cl whls, unused; White 8200, 12R-30”, 3 bu bxs, trash whls, frnt fold, sharp; ’97 JD 1760, 12R-30”, hyd fold, row clnrs, trash whls, farm retire;

 

GRAIN DRILLS: ‘23 Landoll 5531, 40’, 3 sec, 10” sp, grass, mrkrs, scale, pneumatic DP, only planted 1000 ac, cntrls; ‘14 JD 1590, 15’, 7.5” sp, NT, 2pt hitch, low acres, elec rate controller; JD 1560, 20’, 7.5” sp, mrkrs, dolly whl; JD 1560, 15’, 7.5” sp, dolly whl; JD 1560, 10’, dolly whl; JD 750, 15’, Yetter mrkrs, dolly hitch, cast clsg whls, 2 bar CT hrw; JD B, 24×6, 12’; GP 3010, 30’, 7.5” sp, NT, mrkrs; GP 3010, 30’, 7.5” sp; GP 2410, 24’, new NTs, mrkrs; GP 3N4020, 40’, 10” sp, mrkrs, dbl close whls, t-handle; GP 1500, 15’, NT, grass, new seed & NT blds, 8” sp, 2” clsng whls; GP 15’, 8” sp, mrkrs, Yetter NT caddy, hyd frnt gang, sharp; GP 1300, 13’, 7.5”, end whl, grass, press whls, rear hitch, lights; GP SS13, 23 hole, hyd lift, dbl disk, press whls; 2006 CIH 5500, 30’, soybean 24 runs, 15” sp, Yetter mrkrs, good cond; CIH 5400, 15’, 22×8, UM cultipkr, crmblr & Bervac bskt, mrkrs; CIH 5400, 15’, NT, 8” sp, new blds, sharp; CIH 5100, 21×7, grass, press whls, 7.50-20SL; CIH 5100, 18×7, DD opnrs; ’06 CIH 5500, 30’, 24 runs, sybn spec, 15” sp, SI mtrs, exc cond; CIH 5300, 10’, 8” sp, good blds, tight row units; ’12 SF 9433, 30’, 3 sec, only 3700 acres, mrkrs, 7.5” sp;

 

PLANTER & DRILL PARTS: (4) Pr Yetters 15’-20’Mrkrs, cmplt; Pr Yetter 30’ Mrkrs; (12) JD SD Fert Opnrs; (2) Gauge Whls; Brillion DH-212 Dbl Hitch; (12) JD NT’s; White 6100 Plant Unit; (2) JD 7000 Row Units; (2) 10’ Planter Frames, 7”x7” tube, w/ trans; Demco 300 Gal Tank; (6) Yetter NTs off 7000; (12) JD Single Disk Fert Openers; (16) JD 1770 NTs; (3) 12R Squeeze Pumps; (12) Dbl Wheel Trash Whls; (12) Kinze SD Fert Coulters; (2) Sets of (16) Kinze Single Whl Trash Whls; (6) JD 7000 Plntr Units, cmplt; (3) Sets of (8) Yetter NTs; (2) Sets of (2) JD 7000 Drive Whls, w/ spkts & cyl, cmplt; (2) JD 7×7 Seed Trans; (2) 100 gal Liq Fert Tanks, w/ mounts; (2) 70 gal Liq Fert Tanks, w/ JD mounts; JD 7000 Lift Wheel, cmplt; (2) Mrkr Exts w/ blds; (16) Sngl Whl Trash Whls; (8) Yetter NT/Trash Whl Combos; (16) JD 7200 Seed Bxs w/ meters; (24) JD Max Em Plus Units; Pr JD 40’ Mrkrs; (6) JD Closing Whls; JD Houck Hitch; (16) Yetter Drag Chains; (19) Martin Drag Chains; (44) Martin Row Clnr Hubs w/ hardware; (13) Kinze Down Force Springs; (25) Kinze Seed Tubes & Sensors; (28) Kinze Bruch Meter Disks; JD 600 gal Fert Tank & Brkt; (2) Sets of (12) JD NT Coulters; Crate of Asst Kinze Sprkts; (4) Hyd Drives; (32) Clsng Whls; (2) JD 1770 Trans; (2) Fert Pumps; (3) Sets of (8) Yetter Floating Row Clnrs; (8) XP Skins; (12) XP Skins; (16) JD 1770 Box Exts; (24) Floating Whls; (24) E-Set Plates; (24) JD Gauge Whls; (8) Yetter Row Clnrs; (3) Groups of (4) Yetter Row Clnrs; (32) JD Corn Mtrs; (42) Clsg Whls; (16) Row Clnrs; (4) Kinze Drv Whl Units; (16) Huckshoe Fert Opnrs; (16) JD Bean Plts; Piston Pump; (12) JD SD Fert Opnrs;

SPRAYERS: Wilmar 8400 Eagle, 1000 gal, 120’ booms, 46” tires, ss tank, air ride, 3 nzls, Ag Ldr mon, 6000 rate cntrl, ss pump, foamer; Hardi NAC1100, 1100 gal, 90’ booms, foamer, rinse tank, hand wash, 3 nozzles, Ravens SCS450; Hardi Command Plus, 90’ booms, chem induct, rinse tank, pto pump; Hardi 1000 gal, 60’ booms, rebuilt pump; Hardi HC950M, 950 gal, 90’ booms, rinse tank, foamer, Hardi HM1500 cntrls; Hardi TR500, 500 gal, 45’ booms, Smucker foamer, rinse tank; Specialty Sprayer 750 gal, 60’ booms, 15” sp, hand rinse, rinse tank, new 12.5-38; ’06 Fast 9612, 1350 gal, 80’ bms, triple nzls, rinse tank, ISO hook up, hyd hitch, hand rinse tank, 320-90R-46, controller, GreenStar rate; Hardi Nav 4000, 1200 gal, 90’ booms, wired for gps, nice!;

 

APPLICATORS: DMI 16R ANH3 Bar, w/ coulters & knives only; Blue 11x Side Dress Bar; Blu-Jet 11x or 13x ANH3 Bar, Clymer notched clsng whls, Hiniker cold flow; Hiniker 8160 ANH3 Cooler, elec valve; DMI 4250, 13x, disc clsrs, Hiniker 8605 cntrls;

 

FERTILIZER SPREADERS: Stainless Steel 6 ton, tand axle, dbl fan, 540 pto, hyd shut off, 16.5-16.1;

 

VERTICAL TILLAGE TOOLS: JD 2623, 33’7”, 22” blds, hyd roll bskt, rear hitch, hyd hitch, single pt; ‘12 CIH 330, turbo till, 25’, true tand, rflex, lghts, single pt depth, 19.5” blds, guide whls, walk tand, roll bskts, 1 own; GP 2400TT, 24’, new blds, weight kit, good hrw & crmblr;

ROCKFLEX DISKS: SF 1435, 23’, 9” sp, 24” frnt & 23.75” rear blds, gauge whls, walk tands; SF 1433, 19’, 20” frnt & 20.5” rear blds, hyd fold, 3 bar hrw; SF 1233, 18’, 9” sp, 20” frnt & 21” rear blds, frnt gauge whls, rear hitch, mdl bust bar, sharp; SF 1232, 27’, 9” sp, 20” blds; JD 637, 26.5’, 9” sp, new blds & bearing, walk tand, guide whls, sharp; JD 235, 20’, 9” sp, dura-cush gang, 20” frnt & 20.5” rear blds, hyd hitch, mdl bust bar, no welds; ‘08 CIH RMX340, 20’, 9” sp, 21” blds, sharp; CIH 3950, 30’, 9” sp, 18.5” frnt & 20” rear blds, weld on hitch; ‘13 Kuhn Krause 8200, 31’, 24” blds, rear hyd & hitch; Krause 18’, bi-fold; Krause 2214, 14’; ‘07 Landoll 6230-23, 23’, 20” blds, walk tand;

 

DISKS: JD 637, 23’7”, 21.5” frnt & 22” rear blds, 9” sp, 3 bar CT hrw; JD 637, 24’, 22” blds, 7.5” sp, single pt depth ctrl; JD 630, 25’, 7.5” sp, 21.5” frnt & rear orig blds; JD 335, 36’, 9” sp, cone blds, rear hitch & hyds, walk tand; JD 331, 28’, 9” sp, 21” blds; JD 230, 21’, 9” sp, 21” frnt & 21.5” rear blds; JD 210, 14’, 21” frnt & 21.5” rear cone blds, d-tine hrw; JD RWA, 9’; JD KBA, 8’, w/ cyl; CIH RMX340, hyd level, single pt depth, 32’, 9” sp, 21” blds, walk tand; CIH RMX340, 28’, 9” sp, 19.5” frnt & 20.5” rear blds, hyd level, walk tand; CIH RMX340, 18’, 7.5” sp, new 22” blds, mdl buster bar, sngl pt depth cntrl, lights; CIH 3800, 15’, 9” sp, 19.5” frnt & 20” rear blds; CIH 496, 21’, 7.5” sp, late model; IH 496, 22’; IH 496, 18’, 9” sp, 19” frnt & 20.5” rear blds; mdl bust bar; IH 496, 18’, 7.5” sp, rear hitch & hyds, middle bstr bar; CIH 490, 25’, 7.5” sp; IH 37, 12’; Krause 1907, 25’, 9” sp, 21” blds; Kewanee 1175, 22.5’, 9” sp, 20” frnt & rear blds, 3 bar CT hrw; Kewanee 1100, 22’, 8.5”, 19.5” frnt & 20” rear blds, org paint, no welds; BH 14’, 19.5” frnt & 19” rear blds, 9” sp; Ford 205, 48”, 3pt, scrprs, org paint, bevel on blds; IH 490, 24’, 9” sp, 6 new tires, new hyd hoses, lift cyl rebuilt, good wrkg shape; JD BWF, 15’, cone blds, lift cyl, 1 weld on cntr pole;

 

OFFSET DISKS: Taylorway TP670, RF, 8’, 23” notch frnt & 24” rnd rear blds; Taylorway 410, 7’, 7.5” sp, 3 pt, adj angle;

 

FIELD CULTIVATORS: ’15 JD 2210, 45’6”, level lift, 15’ main, low trans, 5 bar spike drag, new sweeps; JD 2210, 22’, walk tand, spike hrw, knock-on shvls, less than 1000 ac, narrow frame, sharp; JD 2200, 36’, 5 bar spike drag, walk tand; JD 980, 44’, 6” sp, 10” sweeps, hvy shanks, 4 frnt gauge whls; ‘03 JD 980, 36’, walk tand, depth whls, rear hitch, lghts, 5 bar flex; JD 960, 36’-38’, walk tand on main/wngs, 5 bar spike drag; JD 960, 30’; JD 960, 24’, bust bar harrow, walk tand on main, sngls on wngs; ‘13 CIH 200, 30’, walk tand, 5 bar drag; CIH TMII, 40.5’, dbl fold, 5 bar drag, red; CIH TM II, 38’, hyd fold, rear hitch, spr shanks, 5 bar drag; CIH 4800, 25’, 5 bar spike drag; CIH 4300, 26’, walk tand, 5 bar drag, sharp; DMI TMII, 22’, rear hitch & hyds, walk tand on wngs, lghts, CT hrw; DMI TM, 24’, 5 bar hrw; WR 2500, 30’, 13’ main frame,  walk tand on wngs, 4 bar CT hrw; JD 980, 36’, walk tands on main/wngs 5 bar spike hrw, nice; CIH 4800, 28.5’, new 7.5” knock on shvls, walk tands on main/wngs; ’14 JD 2210, 42’, c-shank, 2 bar CT hrw, roll hrw, like new; SF 5054, 39’, tri fold, walk tand on main/wngs, 5 bar spike hrw, good cond; ’18 CIH 255, TM, 30’, 3 bar spk hrw, roll bskts; JD 3pt 8’;

 

CULTIVATORS: JD 845, 12R-30”, danish tine, hyd flat fold, gauge whls; JD 85, 8R-30”, flat-fold; JD RM, 4R-36”, rolling shlds, levelers; Hiniker 5000, 6R-30”, 17” sweeps, row shields; Hiniker 6R-30”, NT, w/ guidance; Hiniker 5000, 6R-30”, NT; Harriston 6R-36”, danish-tine; JD 856, 16R-30”, c-shank, hyd fold; WR 3400, 15’, hyd unload auger;

 

SOIL FINISHERS: ‘13 JD 2310 Mulcher, 45’9”, hyd frnt gang, single pt depth; ‘15 JD 2310, 27’9”, rockflex, walk tand, 3 bar spike drag; JD 2310, 18’9”, walk tand, rflex, 5 bar CT hrw, off sm farm; ‘98 JD 726 Mulcher, 33’, hyd frnt gang, 5 bar drag; ’98 JD 726, 35’, rflex, 19.5” blds, 5 bar spike drag; SF 6220, 15’, fold type, sngl pt hook up, 6 bar spike drag; Glencoe 4800, 14’, walk tand, spring shanks, 19.5” blds, hyd gang, lghts, 5 bar drag, same as Landoll 850; Glencoe 4300, 30’; Glencoe 15’, 5 bar spike drag; SF 6220, 18’, single fold;

 

DISK RIPPERS: ‘11 JD 2700, 5x, deep-till, spring reset; JD 512, 9x, auto spring reset, walk tand on main; JD 510, 5x, rockflex, works good; GP 4360, 9x, walk tand; M&W 2200, 7x, walk tand, good points & blds; DMI 900, 5x, auto reset, dbl gang; DMI 527, 5x, 7” wing pts, 4” cover boards, level disks; ’08 Krause 4850-12, 12’, rockflex, roll bskts;

 

RIPPERS: Landoll 2100, 5x, auto reset; CIH 2500, inline, 5x, 3pt, auto reset, sharp; DMI 2500, inline, 10x, 3pt; Brillion 5x 3pt; Black 5 leg, inline, coulters; DMI 2500, 5x, inline;

 

SOIL SAVERS: JD 714, 9x, spring shank, hyd frnt gang, 3” twstd shvls, CT lvlr; JD 714, 9x, 3” shvls, hyd frnt gang, spring shank, walk tand; JD 714, 9x, spring shank, walk tand, hyd frnt gang, 20” blds, single pt depth; Kuhn Krause 4807, 7x, new 4” twist shvls, adj frnt disks, led lights; Glencoe 9x, sprng reset, stretch frame; Glencoe 9x; Binkley-Wilbeck 9x, 11’; Binkley Wilbeck, 7x, 10’, 3 bar spike drag; Deutz 1500, 5x, spr gang, Rem hrw;

 

CHISEL PLOWS: JD 1600, 10’, 10x; CIH 6500, 9x, good pnts & blds, 1 own;

 

CULTIMULCHERS: Dunham Lehr 10’; Brillion 22’;

 

PACKERS: Brillion XL144, 36’, ductile rolls, scrprs, low acres; Brillion 108, 27’, ductile rolls, scrprs, lghts, like new; Brillion 108, 25’, x-fold, scrapers, like new; ‘15 Brillion WFP26, 28’, lghts, scrprs, ext tongue, unused; Brillion 28’, x-fold; Brillion GLP64-01, 5’, dbl roll; Brillion XXL184, 46’, x-fold, ductile rolls, scrprs, ext hitch; ’13 Brillion WFPDS32, 34’, x-fold, ductile rolls, scrprs, lights, ext hitch; Brillion XXL184, 44’, x-fold, ductile rolls, scrprs, ext hitch; Brillion 108, 27’, scrprs, lights, hardly used;

 

CRUMBLERS: UM Rolling Hrw II, 27’, spike drag, small tires; DMI 30’, new tires; DMI 25’, wt kit, ext tongue, good rolls, 9.5L-15L; DMI 24’, hyd fold, ext tongue; J&M TF212, 24’, CT harrow, double twister, lghts, ext tongue, level bar; JD 200 Roll Bskt, 24’, 10’ main, lghts;

 

PLOWS: Kuhn 5x, vari-width; JD 1350-1450, 5x; IH 720, 7x-20”, on land, very nice; D 450, 6x-16”;

 

ROTARY TILLERS: Kuhn Rhino ST63 Rototiller, 42”, 540 pto, gauge whls; 2022 Rhino SRT48 Rototiller, 4’, 540 pto; (2) Rhino 5’ 3pt Tiller; ‘17 Maschino SC300 Tiller, 10’, spike roller, 3pt, sm 1000 pto; Lely Roterra 12’, 1000 pto; Lely Roterra 14’, 1000 pto; Earthquake Walk-Behind Tiller;

MOWERS: (2) Rhino 3 Blade Finish Mower, never used; JD HX20, 20’, batwing, lg 1000 pto, stump jump, chains; JD HX15, 15’, batwing; JD CX15, 15’, flex wing, 540 pto, stump jump, frnt & rear chain shields, single suction blds; JD MX10, 10’, 540 pto, hard tires; JD 1418, 14’; Woods 3180, 15’, batwing, 540 pto; Woods BW180XQ, 15’, batwing, 1000 pto, well maint; King Kutter 6’, 3pt, flex hitch, yellow; IH 60”, 3pt, 540 pto; Woods 3pt Brush Ball, 84”, sharp; Woods RM550-1, 60”, 3pt; IH Cub 60”; Woods Cadet 84, 3pt, 7’;

 

SILAGE EQUIP: NH 824 CH; (2) Miller Pro 4100 Wgns, 18’ box, Kory 12T tand gear, 12.5-15, 540 pto, RH unload; Badger BN950 Wgn, 16’ bx, 540 pto, imp tires, on Badger 12T tand gear; CIH #600 Blwr; ‘90 H&S Super 7+4 Wgn, 16’ box, twin auger, MN 13 ton gear, LH unload; (2) JD 35 Silage Chopper, w/ 2RW CH;

 

FORAGE EQUIP: Gehl 2R-30”; Bale Fork, for q-tach ldr; Kidd 7-16 Bale Grinder, 540 pto; Several 5” & 6” Red Pine Posts, CCA treated; Hoelscher 110 Bale Grapple; (3) Cashels Rnd Bale Handler, dbl hyds; (2) Cashels Rnd Bale Handler, single hyds; Cashels Square Hyd Baler Handler; Cashels Bale Spear; 27’ Bale Conveyor, 110V elec motor; (2) JD Q-tach Bale Spears; NI 324, 2RN, 12 roll bed, late model; NI 323, 1R CH, late model; JD 3955 For Harvester, pull type, 7’ hay hd, hyd hitch, elec cntrls, metal alert; JD 16A Green Chopper, 540 pto, hardly used; IH 56 Blwr, 540 pto, hardly used; Skid Steer QT Bale Squeezer; 8’x20’ Hay Rack; NH 166 Hay Inverter; Westendorf QM Bale Spear; JD 350 Sickle Mower, 9’ cut; ‘19 Redexim 8’ Multi-Seeder, 8’, only 100 ac, 3pt, 1 own, like new!; ’23 Brillion SSB12 Sdr, 12’, dbl box, hyd lift, unused; Homemade Bale Fork, w/ skid ldr attach; Grain-o-vator 20 Feed Cart, tand axle, hyd swing;

FLAIL SHREDDERS: Sukup 15’, sm 1000 pto, good flails, w/ windrower; Loftness 240S, 20’, 4 whl, sharp;

LIVESTOCK: (10) Groups of (10) Freestanding Panels, 24’; (6) Freestanding Panels w/ gates, 24’; (2) Groups of (5) Freestanding Panels, 24’; (1) Groups of (4) Freestanding Panels, 24’; 4’ Dbl Sided Hog Feeder; (29) Wood Fence Posts;

 

HAYBINES/DISCBINES: ‘22 NH 210, 10’ 540 pto, hyd swing, low acres, always shedded; NI 5209, 540 pto, good rolls, works good;

 

DISK MOWERS: ‘21 Frontier DM5070, 8’ cut, 3pt; NH 616, 3pt, 540 pto, like new, sharp;

 

HAY BALERS: ‘21 NH BC5070, sq, hyd tension, twine tie, 540 pto, sharp; ‘17 NH BC5070, sq, 540 pto, hyd hitch adj, twine tie, bale chute, sharp; ‘17 NH RB560, rnd, 7000 bales, bale splice, 1000 pto, 18L-16.1SL, Bale Command Plus; ‘15 NH 460, rnd, silage spec, net wrap, 19K bales, good belts, kicker, 31×15 flotation tires; NH 273, sq, twine tie; ‘17 CIH SB541C, sq, 540 pto, twine tie, hyd tension, sharp; ‘12 CIH RBX 564, rnd, net wrap; Vermeer 554XL, rnd, 4’x5’ bale, rear eject, 13.50-15, Accu-Bale; ‘09 JD 568, rnd, 9800 bales, net, good belts; JD 530, rnd, 540 pto, twine tie, equalizer htch, JD bale trak; JD 346, sq, wire tie; 2000 JD 338, sq, self-cont hyds, bale skies, w/ Hoelscher accum, runs good; Hesston 5530, rnd; Gehl 2880, rnd, twine tire, tucker whls, good belts, sm 1000 pto;

 

HAY RAKES: NH 256; Pequea 910; Pequea HR939; Kuhn GA7822, twin rake, works;

 

FEED GRINDERS/MIXERS: CIH 1250, 540 pto, intake auger good hmrs; IH 1150, intake auger, 2 screens, good hammers, always shedded; Gehl 125, intake auger, 540 pto, runs smooth, 2 screens, hyd intake; RMS Roller Grinder, 2 augers, dbl stack, 6’ mill, (2) 75hp 3 phase elec motors, 540 pto; AW 475, intake auger, hyd swing & drive, 3 sets of screens; Gehl 100, hyd drive, 4 scrns, good hmrs;

 

MANURE SPREADERS: ‘23 NH 195, sm 1000 pto, top beater, dbl apron, slop gate, poly floor, 425/65R22.5; ‘17 NH 195, tand axle, dbl chain, 1000 pto, slop gate, super single tires; NH 195, lg 1000 pto, dbl chain, top beater, poly floor, very clean; ‘17 NH 165, single axle, side exts, hyd end gate; ‘19 Meyer 3954, 3rd auger, 16.5-16.1, rear dschg; ‘13 Meyer 3954, V-max, 16.5-16.1 flotation tires; Agco NI 3743, tand axle, hyd apron, 540 pto, poly floor; Better Built 3150, liq, frnt inj, 4 knife, 1000 pto, good tank & pump, well maint; ‘09 H&S MSW430, 540 pto, tand axle, 16.5L-16.1; MF 3724, 540 pto, slop gate, tand axle; Kuhn Knight SL114, pro twin slinger, single axle, 16.1 flotation tires, lights; Knight 180, 540 pto, single axle; NI 243, t-length chain, 540 pto, good floor, works good;

 

 

TRUCKS & TRAILERS: ‘20 Hillsboro Gooseneck Livestock Trlr, 24’, HD axle, dividers, center sliders; Chevy C65 Grain Truck, gas, tand axle, good tarp, sharp; ‘03 Timpte 40’ Grain Trlr, new pwr tarp, steel whls, air ride; ‘96 Timpte 40’ Grain Trlr, tarp, elec cntrls, remote, spring ride, 11R-24.5, alum whls; ‘02 Wilson DWH Grain Trlr, elec roll tarp, spring ride, 11R-22.5, alum whls; GMC 3500SL Dump Truck, dsl, 4×4, 79K miles, hyd dump bed, 5 sp, 1 own, salt spread, frnt bld; ‘09 IH 7500 Dump Truck, dsl, Allison auto trans, single axle, frnt bld w/ wing bld; ‘23 PJ DL167 Trlr, 16’, hyd dump; 2000 RE Custom Trlr, 40’, gooseneck, ramps; ‘97 GMC Sierra C3500 Utility Truck, low miles, black, runs good; ‘76 Schien 32’ Alum Dump Trlr, roll tarp, spring susp, steel frame, poly insert; ‘74 Schien 28’ Dump Trlr, good tarp, grain tight; Ravens 26’ Alum Dump Trlr; ‘94 Stahly 1900L Fert Trk, CAT 3116 eng, 5300 hrs, 12’ sprdr, ss, 110K miles, 78×25.00-20; ‘99 Wabash Van Trlr, 45’, 11R-22.5, bud whls, slider rear axle, roll up door; 400 Bu Tri Axle Gooseneck Grain Trlr, hyd dump; ‘16 Reading Classic II Service Truck Body, off 1 ton sngl whl long bed; 40’ Van Trlr, for storage, no title; ‘80 Chevy C30 PU, 2WD, flat bed, 454 eng, duals, 4 spd; ‘99 Trail King 18’ Flatbed Trlr; ‘87 GMC C7000 Pick up; ’93 Dorsey Flat Bed Semi Trlr, 42’, slider, good brks, fair tires; ’97 Volvo Day Cab Semi, shwg 20K miles (approx. 650K actual), Cum N14 12 sp eng; ’74 Fruehauf Demi Semi Trlr, w/ Wilmar 16T fert sprdr, 3 comp, tarp, hyd pump, 2 line wet kit, tilt deck; 7.5’x14’ Trlr, w/ 1’ sides; ’90 Travalong 20’ Livestock Trlr, gooseneck; ’07 Chevy K3500 Trk, 90K miles, 1 own, new trans & fuel pump 2 yrs ago, 12’ bed, 5th whl;

 

TIRES & RIMS: (2) 18.4-42 Clamp-on Duals; (2) 11.00-24.5 w/ rims, hub pilot; (3) 8.25-24.5 Rims, hub pilot; (2) 13.6-28 w/ rims; (2) 38” Rear Whls, w/ wedges, fits JD 4440, 4450; (2) 30.5L-32 Auger Wgn Tires, no cuts; (2) 12-16.5; (2) Prs of 20.8-42; (2) 24.5-32; (1) 28L-26 w/ rim; (1) 14.9-24; (4) 11R-22.5 w/ rims; (2) 32×15.5-16.5SL, 14 ply; L-Shaped Dsl Fuel Tank, 105 gal; 100 gal Dsl Fuel Tank; (4) 480/80R46;

 

MISC EQUIP: Phillips 4305A Rotary Hrw, 42’; Hay Buster H-106 Rock Picker, intake rake & hopper; (2) Degelman Rock Pickers; Yetter Seed Tender, dolly whl, Briggs & Straton 11hp gas eng; 40’ Storage Container, 2 side doors; Several 20’ Storage Containers, new & used; 6R Down Corn Reel; Country Line Log Splitter, 6.5hp, 22 ton; Cub Cadet Log Splitter, 277cc motor, unused; 26’ Hitchhiker Rake; Power Unit & Seed Auger, runs good; Several 20’ & 40’ Storage Containers; 30’ 5 Bar Spike-tooth Drag; Cmns 8.3 Eng, 4000 hrs, runs good; JD 404 Eng, 3800 hrs, turbo; 8R-30” Down Corn Reel; UM 15’ CT 2 bar Harrow; 30’ Flex Drag; 30’ 5 Bar Spike Drag of fJD 960; Wild Cat 3pt Compost Turner, 540 pto, good shape; McFarlane 30’ Hrw Cart; 16’ Rolling Hrw off CIH 870; 16’ HD Spike Hrw; 1000 gal Dsl Fuel Tank, pump has sm leak, works good; JD 400 Rot Hoe, 20’, 3pt; 6’ 3pt Spring Tooth Hrw; NI 518 Snow Blwr, 7.5’, 540 pto, great cond; Walk Behind Snow Blwr, runs good, no elec start; Lundell 8’ Snow Blwr, hyd spout; Western 8’ Snow Plow, w/ trip edge;

MISC: (2) Concrete Case Eagles; Speedco Quick Cplr; JD Green Cyl, good hoses; (7) New DMI CNH Ripper Points; Pr JD Fndrs off JD 8640, nice; 8R Corn Reel, cmplt, off JD 8R; (9) Mgnm Frnt Wts; (6) Case Mgnm Frnt Wts; (10) Late Model Mgnm Frnt Wts; (2) Sets of (10) JD 8000 Series Frnt Wts; (2) JD 8000 Series Rear Wts, 500 lbs ea; (4) JD 7000-8000 Series 165 lb Whl Wts; (2) Sets of (8) IH 100 lb Stmpd Frnt Wts; (12) IH 100 lb Stmpd Frnt Wts; (6) IH Rear Wts, for IH 1466; JD Q-Hitch; Radiator for IH 1460, like new; CAT 3208 Eng, runs good, from trk w/ 70K miles; Lg JD Wt Brkt, for 10, 20, 30 series; (32) Bread Crates; 7.3 Dsl Eng, non-turbo, auto trans; (12) Used Concrete Culverts, 27”; (14) AC Frnt Wts; (8) JD Frnt Wts, off JD 30 series; (6) JD 40 Series Whl Wts; (10) JD 30 Series Frnt Wts; (2) Sets of (4) MH 150 lb Wts; (2) JD Inner Whl Wts, 628 lbs ea, w/ hardware; (2) 24”x38” Wide Rims; (3) Plow Shanks, Bars, Coulters; Alum Storage Box; Metal Cart; IH 806 Draw Bar Parts; (4) Shvls for Walk-Behind Cult; JD Quick Cplr off 4020; (30) 19.5” Disk Blds; (27) 18” Disk Blds; (32) 16.5” Disk Blds; (16) Corn Meters; (4) Plow Cltrs; (3) IH Plow Btms; (9) Ford Frnt Wts; Several JD 960 FC Shanks; (10) Glencoe 4300 Shanks; (2) DMI Ripper Shanks, spring; (38) JD 400 Rot Hoe Whls, like new; (4) New JD 2100 Shanks; (7) New JD 2100 Hard Surface Shanks; Rear Hitch for Combine; JD Cat IV Quick Cplr; JD Cat II Q-Hitch; (3) Rock Bxs; Pr JD Frnt Fndrs; Pr IH Frnt Fndrs; Frnt Wt Brkt off STX; Frnt Wt Brkt off Case; JD 4010 Rear End; Creamer 45’ Bkt Elvtr; 45’ 3 Sec Alum Ladder; 500 gal Slim Line Tank, 3pt; 500 gal Slim Line Oval Tank, skid mnt; Long Feeder House for JD 6600; Long Feeder House for JD 7700; Grain Bin Door; Tool Box for PU; Harbor Freight Parts Washer; (2) Knapheide Truck Gates; M&W Wgn Chute; (2) Grain Cart Chutes; Estate Yard Rake; Hyd Log Spltr; (12) Strip-till Roll Bskts; Alpha Sport LG150 4 Whlr, new drive chain, needs strtr & batt; Agri Fab 10 cf Wgn; Metal Dolly, Delta Tool Box; (4) Plastic Pallets; Cat 3 Q-Hitch; (5) Log Chains; Misc Hvy Chains; Sprg Cshn Hitch; Pintle Hitch; PTO & Pulley; 35’ Alum Ext Ldr; JD PHD, 9” bit; (3) Trlr Storage Bxs;

Much more to be added before the auction! Watch our ads in the next two weeks for updates. 

WE OFFER LIVE ONSITE, ABSENTEE & PHONE IN BIDDING AT NO CHARGE. WE ALSO OFFER ONLINE BIDDING AT PROXIBID & EQUIPMENT FACTS WITH A 3% BUYER’S PREMIUM.

WE SELL WITH 3 TRUCKS AT A TIME SO BRING A FRIEND. UTV’s & GOLF CARTS ARE WELCOME!

ST. ANNE CONSIGNMENT AUCTION & EQUIPMENT SALES

6997 E 5000S RD, ST. ANNE, IL  60964

(815)427-8350 OFFICE  *  (815)791-0723 JIM  *  (815)954-4812 JAMES     contact@stanneauction.com

NO BUYER’S PREMIUM FOR ONSITE BUYERS. ALSO NO LOADING OR UNLOADING FEES!

PLEASE CONTACT OUR OFFICE IF YOU HAVE ANY QUESTIONS. THANK YOU!